Rigging Motors/Hoists

WHAT ARE RIGGING MOTORS AND HOISTS?

Rigging motors and hoists are two lifting solutions that are used for lifting and lowering heavy loads. They are used across many different industries such as construction, manufacturing, and entertainment.

ARE RIGGING MOTORS AND RIGGING HOISTS THE SAME THING?

Although there is some overlap between what the terms rigging motor and rigging hoist mean, they are typically used to refer to different things. The term Rigging hoist is used to refer to a wide range of lifting equipment solutions that are used across a number of different industries, whereas a rigging motor is used to specifically refer to a type of motorised hoisting solution that is used in entertainment or stage settings. So, the term rigging hoist can be used to refer to a range of lifting solutions including a  rigging motor, however a rigging motor is referring to a specific piece of equipment. 

WHAT ARE LOADGUARD RIGGING HOISTS?

LoadGuard rigging motors are a range of lifting solutions produced by American Manufacturer Colombus Mckinnon. The Loadguard rigging hoists conform to  BGV D8+ Germany safety standard, which specifically pertains to the use of lifting equipment. It outlines safety guidelines and standards for the operation and maintenance of lifting devices, such as hoists and cranes. These include, Inspection and maintenance, safety measures to be followed during the operation of lifting devices, guidelines for training and certification of personnel operating or managing lifting equipment, and specific standards for different types of lifting gear and their safe usage.

RIGGING MOTORS FROM LIFTING EQUIPMENT STORE

Lifting Equipment Store supply the full range of CM Rigging Motors and LoadGuard Rigging Hoists.

Whether you require a basic single phase all black basic hoist or a three-phase double braked motor suitable for rigging over people's heads without the aid of a secondary safety component; we are sure to help you find the right solution to your application.

Our Favoured Line of Rigging Motors; LoadGuard.
250kg-5000kg Capacities.

For more information on our range of Rigging Motors/Hoists contact our sales department.

COMPONENTS BREAKDOWN

Brake: Quiet operation is achieved with the LoadGurd's new advanced braking system which is virtually maintenance free. For maximum safety the brake is mounted after the slipping clutch; clutch wear does not effect the integrity of the load. Double brake assembly available which can be independently checked for correct operation.

Control: Simple technology ensures no electrics are susceptible to interference. Manufactured to feature reliable construction using proven components. Emergency stop contactor if required can be fitted (quite common in permanent installations). Low voltage 42V control system (100v or 24v available on request).

Limit Switch: Available with 2 or 4 position limit stops to protect your load- for added safety. Simple adjustment, with positioning and repeatability. Lifting heights up to 120m.

Load Chain Wheel: Manufactured from hardened steel. With additional chain pockets, type 25 hoist with six pockets, most other hoist feature 5 pocket load chain wheels, the LoadGuard 6 pocket wheel reduces noise creating the perfect hoist for use in shows and entertainment sectors where low noise level is vital to prevent interruption to the show. Double bearing support with sealed bearings, drain system available for load chain wheel area when hoist is inverted to avoid the hoist motor from filling with water through the chain entrance when used outdoors.

Transmission: Permanent grease lubrication for wear resistant operation with no oil leakage. Helical first and second gear teeth reduces noise again. Improvements to gear designs also adds to this factor.

Chain Guide: Replacement can be performed without having to dismantle the hoist. Two part construction optimizes maintenance along with reinforced polyoxmethylene material which is highly wear resistant. Wear plates are fitted to the underside of the hoist to aid chain guidance and elimination of chain jamming.

Clutch: Overload is prevented with the addition of a slipping clutch, simple and precise adjustment at workshop lever, no exterior adjustment possible to prevent accidental adjustment. Clutch is located in the rotor shaft outside the drive chain. Highly resistant to wear and maintenance free. Individual clutch parts are available through our spares department without the need to purchase a full clutch system.

Motor: Designed to operate in the toughest conditions with one or two speed operation to suit your application. Special power supplies available including some hoists for single phase power supply only (please note double braked hoists require three phase power). Optional thermal cut-out device prevents overheating.

Load Chain: Surface hardened Class DAT 8SS to FEM 9.671. Black coated as standard for incognito design, or zink plated if required. Calibrated especially for the hoist.

Housing: Cast aluminum housing with maximum solidity, ideal for extreme working conditions, the body has cooling fans cast to dissipate heat caused from operation of the hoisting unit. Aluminum end covers fitted and sealed to prevent water penetration. East to change 1-fall to 2-fall operation with no need to dismantle the hoist unit.